Esp8266 Wifi Module

(0 reviews)
Brand
China

Inhouse product


Price
৳200.00 /1
Quantity
Total Price
Share

Reviews & Ratings

0 out of 5.0
(0 reviews)
There have been no reviews for this product yet.

ESP8266 – interesting platform for WiFi enabled projects This small board can act as WiFi module for Arduino (or other µc – Teensy, Netduino, etc) or as standalone microcontroller. With RISC processor running at 80 MHz and with 1MB Flash You can do lot interesting projects. It has 2 GPIO pins to interact with other modules (OneWire).

What is this ESP8266?

  • It’s a wireless SOC
  • It has GPIO, I2C, ADC, SPI, PWM and some more
  • It’s running at 80MHz
  • 64KBytes of instruction RAM
  • 96KBytes of data RAM
  • 64KBytes boot ROM
  • It has a Winbond W25Q40BVNIG SPI flash
  • It’s a RISC architecture
  • The core is a 106micro Diamond Standard core (LX3) made by Tensilica
  • The ESP8266 chip is made by Espressif
  • Modules bearing this chip are made by various manufacturers

Specifications:

  • 802.11 b/g/n protocol
  • Wi-Fi 2.4 GHz, support WPA/WPA2
  • Super small module size (11.5mm x 11.5mm)
  • Integrated 10-bit ADC
  • Integrated TCP/IP protocol stack (ipv4 only at the moment)
  • Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, and power management units
  • +20dBm output power in 802.11b mode
  • Supports antenna diversity
  • Deep sleep power <10uA, Power down leakage current < 5uA
  • Integrated low power 32-bit MCU
  • SDIO 2.0, SPI, UART,  I2C
  • STBC, 1×1 MIMO, 2×1 MIMO
  • A-MPDU & A-MSDU aggregation & 0.4μs guard interval
  • Wake up and transmit packets in < 2ms
  • Standby power consumption of < 1.0mW (DTIM3)
  • Operating temperature range -40C ~ 125C

ESP8266-01 Features:

  • Low cost, compact and powerful Wi-Fi Module
  • Power Supply: +3.3V only
  • Current Consumption: 100mA
  • I/O Voltage:  3.6V (max)
  • I/O source current: 12mA (max)
  • Built-in low power 32-bit MCU @ 80MHz
  • 512kB Flash Memory
  • Can be used as Station or Access Point or both combined
  • Supports Deep sleep (<10uA)
  • Supports serial communication hence compatible with many development platform like Arduino
  • Can be programmed using Arduino IDE or AT-commands or Lua Script

Applications:

  • IOT Projects
  • Access Point Portals
  • Wireless Data logging
  • Smart Home Automation
  • Learn basics of networking
  • Portable Electronics
  • Smart bulbs and Socketss