5A PWM DC Motor Speed Controller With CW CCW Reversible Switch

Size:10-40V 5A 150W
Input Voltage: DC 10V-40V
Current: 5A
Overload Protection Current: 8A (30s short-circuit time at most)
Output Power: 150W max
PWM Range: 0%-100%


Wiring method: 1.Please Connect the power cable to ensure that the positive and negative switch is in the middle zero position.

2. Please Connect the DC power supply to ensure that the DC power supply voltage range is greater than 10V and less than 40V.

That will Ensure the power output power meets the motor's working needs.

Note: Do not reverse the positive and negative terminals of the DC power supply. Otherwise ，the governor may be damaged.

3. when Connected to the motor, the motor wire can be positive or negative.

4. when Adjust the switch. The forward and reverse switch is used to control the direction of the motor speed.
When the switch is at zero position, the motor stops.

5. The adjust potentiometer knob can change the governor output duty cycle, motor speed changes.

5. Size: 74mm*46mm*27mm(2.91*1.81*1.06 inch)

6 Hole spacing: 63.5mm*36.5mm

7. Aperture: 3.5mm, Weight: 60g(0.13lb )